Ramsey Winch HDGY-350R W/4.5 CID MOTOR - Manual (Page 3)

1
RAMSEY WINCH MODEL HDG‐350 RAM‐LOK ®
PLEASE READ THIS MANUAL CAREFULLY.
This manual contains useful ideas in obtaining the most efficient operation from your Ramsey Winch,
and safety procedures one needs to know before operating a Ramsey Winch.
WARRANTY INFORMATION
Ramsey Winches are designed and built to exacting specifications. Great care and skill go into every
winch we make. If the need should arise, warranty procedure is outlined on the back of your self-
addressed postage paid warranty card. Please read and fill out the enclosed warranty card and send it
to Ramsey Winch Company. If you have any problems with your winch, please follow instructions for
prompt service on all warranty claims. Refer to back page for limited warranty.
SPECIFICATIONS:
CONFORMS TO SAE J706
Rated Line Pull (lbs) ................................................................ 10,000
(Kg) .................................................................. 4,536
Gear Reduction ................................................................................. 30:1
Weight (without cable) ...................................................... 110 lbs (50 Kg)
Duty Cycle
(ft) ....................................................................... 183
LAYER OF CABLE 1 2 3 4**
*Rated line pull
per layer
lbs 10,000 8,100 6,900 6,000
Kg 4,530 3,670 3,120 2,720
*Cable Capacity
ft 10 30 45 70
m 4 9 15 21
*Line Speed
(at 15 GPM)
FPM 26 31 36 41
MPM 7.9 9.4 10.9 12.4
*These specifications are based on recommended wire rope of .44 inch
dia. extra improved plow steel or equivalent
**Does not conform to SAE J706 specifications.
NOTE: The rated line pulls shown are for the winch only. Consult the wire rope manufacturer
for wire rope ratings.