Ramsey Winch HDG-350 RAM LOK - Manual (Page 18)

RAMSEY WINCH MODEL HDG-350 RAM-LOK ®
PLEASE READ THIS MANUAL CAREFULLY.
This manual contains useful ideas in obtaining the most efficient
operation from your Ramsey Winch, and safety procedures one needs to
know before operating a Ramsey Winch.
WARRANTY INFORMATION
Ramsey Winches are designed and built to exacting specifications.
Great care and skill go into every winch we make. If the need should
arise, warranty procedure is outlined on the back of your self-addressed
postage paid warranty card. Please read and fill out the enclosed
warranty card and send it to Ramsey Winch Company. If you have any
problems with your winch, please follow instructions for prompt service
on all warranty claims. Refer to back page for limited warranty.
SPECIFICATIONS: CONFORMS TO SAE J706
NOTE: The rated line pulls shown are for the winch only. Consult the
wire rope manufacturer for wire rope ratings.
1 16
Rated Line Pull (lbs.) ……………………………………… 10,000
(Kg) ……………………………………… 4,536
Gear Reduction ……………………………………………… 30:1
Weight (without cable) ………………………….. 110 lbs. (50 Kg)
Duty Cycle (ft.) ……………………………………… 183
1 2 3 4**
* Rated line pull lbs. 10,000 8,100 6,900 4,800
per layer Kg 4,536 3,670 3,120 2,180
ft. 20 50 85 125
m 6 15 25 37
* Line Speed FPM 32 38 44 54
(at 15 GPM) MPM 9,7 11,5 13,3 16,4
** Does not conform to SAE J706 specifications.
* These specifications are based on recommended wire rope of .44
inch dia. extra improved plow steel or equivalent
LAYER OF CABLE
* Cable Capacity