Ramsey Winch DCS-200 SPEED REDUCER - EZ ANCHOR - Manual (Page 3)

PLEASE READ THIS MANUAL CAREFULLY
This manual contains useful ideas in obtaining the most effi cient operation from your
Ramsey Speed Reducer, and safety procedures one needs to know before operation.
WARNINGS
DO NOT EXCEED MAXIMUM RATINGS SHOWN IN THE TABLE.
DO NOT USE SPEED REDUCER TO LIFT, SUPPORT, OR OTHERWISE TRANSPORT
PERSONNEL.
DISCONNECT THE REMOTE CONTROL SWITCH FROM SPEED REDUCER WHEN NOT
IN USE. A RAMSEY PART NO. 282053 SAFETY ON-OFF SWITCH IN YOUR VEHICLE IS
RECOMMENDED.
IF A CABLE DRUM IS ADDED, A MINIMUM OF 5 WRAPS OF CABLE AROUND THE
DRUM IS NECESSARY TO SUPPORT THE RATED LOAD. A CABLE CLAMP IS NOT
DESIGNED TO HOLD THE LOAD.
WARRANTY INFORMATION
Ramsey Speed Reducers are designed and built to exacting specifi cations. Great
care and skill go into every speed reducer we make. If the need should arise, war-
ranty procedure is outlined on the back of this manual. If you have any problems
with your speed reducer, please follow instructions for prompt service on all warranty
claims. Refer to back page for limited warranty.
RAMSEY ELECTRIC SPEED REDUCER MODEL DCS-200 SERIES
6
180
5
4
3
2
1
0
270 360
MINUTES
AMPS
DUTY CYCLE
Speed reducer duty cycles is shown below:
12V