Poly-Tex Poly-Vent (Retrofit) - Manual (Page 25)

25
Below are some hints on how to properly care
for your new Poly-Vent system.
1. Inflate the Poly-Vent occasionally - even during hot weather - to keep it in proper working
order.
2. Do not set objects on the Poly-Vent when it is deflated.
3. Inflate your Poly-Vent after a rain to let any accumulated water drain off.
4. Check periodically for tears or punctures. If any holes are found, repair with Polypatch tape.
5. Keep the gutters free of dirt and debris for a tight seal.
6. When Poly-Vent is not used for long periods, or is simply becoming dirty, inflate the vent
and rinse off the inside and outside of the tubes with water.
7. If you are in a climate where you won't need your Poly-Vent for long periods of time, remove
it from the structure and store it in a safe place out of the weather.
8. Regularly check the blowers and flex tube(s) for damage or obstructions.