Poly-Tex Poly-Vent (Retrofit) - Manual (Page 14)

ATTACHING
THE TOP OF
THE REAR GUIDE
14
INSTRUCTIONS:
5A. INSTALL FIRST SET OF GUIDES. THE GUIDES THAT MOUNT TO
THE INSIDE (STRUCTURE SIDE) ARE MOUNTED INSIDE THE
GUTTER FLANGES. THE GUIDES THAT MOUNT TO THE OUTSIDE
OF THE POLY-VENT ARE MOUNTED OUTSIDE THE GUTTER
FLANGES.
IMPORTANT NOTE: ALL BOLTS MUST BE INSTALLED WITH THE
BOLT HEAD ON THE INSIDE OF THE POLY-VENT FRAME TO
PREVENT DAMAGE TO THE POLY-VENT TUBES.
GUIDE MOUNTS OUTSIDE
OF GUTTER FLANGE
1/4" LOCK WASHER
1/4" HEX NUT
1/4" x 3/4" HEX BOLT (INSIDE)
GUIDE MOUNTS INSIDE
GUTTER FLANGE
1/4" x 3/4" HEX BOLT
1/4" LOCK WASHER
1/4" HEX NUT
GUIDE MOUNTS OUTSIDE
OF GUTTER FLANGE