Poly-Tex Poly-Vent (Retrofit) - Manual (Page 15)

15
INSTRUCTIONS:
6A. INSTALL THE ADJOINING SECTIONS OF TOP
AND BOTTOM GUTTERS.
6B. OVERLAPPING SECTIONS SHOULD BE ASSEMBLED
APPROPRIATELY FOR PROPER WATER DRAINAGE.
ADJOINING GUTTERS SHOULD BE SLID UP INTO
EXISTING GUTTERS IF INSTALLING FROM HIGH END
TO LOW END. ADJOINING GUTTERS SHOULD BE SLID
DOWN OVER THE TOP OF EXISTING GUTTERS WHEN
INSTALLING FROM LOW END TO HIGH END.
6C. CONTINUE TO ADD GUIDES EVERY 4 FEET.
LAG SCREW, SELF-DRILLING
SCREW, OR OTHER APPROPRIATE
FASTENER (NOT SUPPLIED).
1/4" LOCK WASHER
1/4" HEX NUT
1/4" x 3/4" HEX BOLT
1/4" LOCK WASHER
1/4" HEX NUT
1/4" x 3/4" HEX BOLT (INSIDE)