Poly-Tex Poly-Vent (Retrofit) - Manual (Page 16)

16
BLOWER
MOUNTING
BRACKET
5/16" x 1-1/2"
HEX BOLT
5/16" LOCK WASHER
5/16" HEX NUT
MOUNT BLOWER
MOUNTING RAIL
TO RAILS USING
APPROPRIATE
FASTENERS
(NOT PROVIDED)
Mount the blower mounting rail to your structure's rails.
Because of the variety of rail types that may be used, no
fasteners are provided. Use appropriate fasteners for
your particular application.
Mount the blower mounting bracket to the blower
mounting rail using the 5/16" fasteners provided.
Insert the pv plug through the blower mount.
Bolt the poly-vent blower to the blower mount with the pv plug
between the blower and the mount using (4) 1/4" X 3/4" carriage
bolt, lock washer, and hex nut.
Slide the 3.25" hose clamp over the 3" X 5' flex tube leaving the
clamp loose temporarily.
Slide the 3" X 5' flex tube with the 3.25" clamp over the pv plug
and secure it in place by tightening the 3.25" hose clamp.
FLEX TUBING
1/4" HEX NUT
1/4" LOCK WASHER
BLOWER BLOWER
MOUNTING
BRACKET
3.25" HOSE CLAMP
1/4" x 3/4"
CARRIAGE BOLT
PV PLUG