Otter Outdoors Pro Ice Lodge - Manual (Page 7)

Page 7
14. Attach Front main frame assembly (Assembled in Step 13) onto frame brackets (Item 3 and 4). Secure with 1/4
nylon hex lock nut (Item 28). Ref. Diagram 12
4
3
3
Front Main Frame Assembly
Diagram 12
28
13. Assemble Front Main Frame Bar: Insert the outer main frame bar (Item 12) into the middle main frame bar
(Item 14). Fasten with self-tapping screw and plastic protector (Item 22). Slide the sleeve (Item 21) over the main
frame extension bar (Item 10). (Line up holes with button lock, press lock in as you slide over the bar).
Insert the black plug (Item 23) into the main frame extension bar (Item 10). Insert outer main frame bar (Item 12)
into sleeve (Item 21). Cover end of main frame extension bar (Item 10) with black end cap (Item 24). Ref.
Diagram 11.
Diagram 11
23
12
14
22 21
24
Button
lock
10
12
10
22
22
22
Note: Use a light oil
such as WD-40 to
lubricate the poles to help
them slide easier. Wipe
off any excess. Silicone
may be substituted but is
not as effective.
Note: Predrilling a
3/32” hole will make
installation of
screws easier.