Otter Outdoors Pro Ice Lodge - Manual (Page 6)

Page 6
12. Attach Back and Center main frame assemblies (Assembled in Step 11) onto frame brackets (Item 3 and 4).
Secure with 1/4 nylon hex lock nut (Item 28). Ref. Diagram 10.
4
3
3
Back Main Frame Assembly
Center Main Frame Assembly
28
Diagram 10
11. Assemble Back and Center Main Frame Bars: Insert the outer main frame bar (Item 13) into the middle main
frame bar (Item 14). Fasten with self-tapping screw and plastic protector (Item 22). Slide the sleeve (Item 21)
over the main frame extension bar (Item 11). (Line up holes with button lock, press lock in as you slide
over the bar). Insert the black plug (Item 23) into the main frame extension bar (Item 11). Insert outer main
frame bar (Item 13) into sleeve (Item 21). Cover end of main frame extension bar (Item 11) with black end cap
(Item 24). Ref. Diagram 9.
Diagram 9
23
13
14
22 21
24
Button
lock
11
13
11
22
22
22
Note: Use a light oil
such as WD-40 to
lubricate the poles to help
them slide easier. Wipe
off any excess. Silicone
may be substituted but is
not as effective.
Note: Predrilling a
3/32” hole will make
installation of
screws easier.