beautypg.com

Otter Outdoors ATV MONSTER BOXES MEDIUM User Manual

Otter Outdoors Sports and recreation

background image

411 West Congress St., Maple Lake, MN 55358 Toll Free 877-466-8837

www.otteroutdoors.com

ASSEMBLY INSTRUCTIONS FOR MEDIUM AND LARGE ATV MONSTER BOXES

Parts

List:

Tools

Required:

Square U-Bolts (4)

Drill with 5/16” bit

Flat Strap (4)

Marker to layout holes

¼” Nylock Nuts (8)

7/16” Wrench


Installation:

1. Set and square Monster Box (item 5) on rack (item 4) of ATV.
2. Layout holes (one on each side of bar) to be drilled in bottom of box, according to rack.

Configuration. (Best to use outside edge bars for ease of assembly).

3. Hole centers should be 1 ½” apart to fit u-bolts provided.
4. Drill 5/16 holes through the box
5. Slide U-Bolts (item 1) through box and around bar.
6. Slide Flat Strap (item 2) up on U-Bolt
7. Tighten ¼” Nylock Nuts (item 3) down to Flat Strap.

LARGE MONSTER BOX:

MEDIUM MONSTER BOX:








Instructions

-

70753

This manual is related to the following products: