Otter Outdoors Pro XT 1200 Lodge - Manual (Page 7)

Page 7
14. Attach Front main frame assembly (Assembled in Step 13) onto frame brackets (Item 3 and 4). Secure with 1/4
nylon hex lock nut (Item 28). Ref. Diagram 12
4
3
3
Front Main Frame Assembly
Diagram 12
28
13. Assemble Front Main Frame Bar: Insert the outer main frame bar (Item 12) into the middle main frame bar
(Item 14). Fasten with self-tapping screw (Item 22), plastic protector (Item 33), and star washer (Item 34). Slide
the sleeve (Item 21) over the main frame extension bar (Item 10). (Line up holes with button lock, press lock
in as you slide over the bar). Insert the black plug (Item 23) into the main frame extension bar (Item 10). Insert
outer main frame bar (Item 12) into sleeve (Item 21). Cover end of main frame extension bar (Item 10) with black
end cap (Item 24). Ref. Diagram 11.
Diagram 11
Note: Use a light oil
such as WD-40 to
lubricate the poles to help
them slide easier. Wipe
off any excess. Silicone
may be substituted but is
not as effective.
23
12
21
24
Button lock
should face
inward
10
12
10
14
33
34
33
34
22
33
34
22
Important: Do
not overtighten to
prevent stripping
of threads.
22