Otter Outdoors Pro XT 1200 Lodge - Manual (Page 10)

Page 10
19. Slide the tent over the main frame bar
assembly, then fasten the velcro straps
on the inside of the tent to each main
frame bar. Ref. Diagram 17.
Tent
Main Frame
Assembly
Diagram 17
Diagram 18
Back
Left Side
Front
Right Side
Line up seam on the corner
Left Side Back
1
2
Detail A
Trim seal
Self-tapping screw
Note: Collapsing
the center and front
main frame poles
part way down
will make installation
easier.
20. The canvas tent (Item 2) has a plastic trim seal sewn into the edge, snap the plastic trim seal to the edge of the
sled (Item 1). Start at the front left corner and work your way around across the back and up the opposite side.
Ref. Diagram 18.
Optional: Secure with extra self-tapping screws if needed. See Detail A. Ref. Diagram 18.
Optional Step
32