Otter Outdoors Pro XT 1200 Lodge - Manual (Page 4)

Page 4
6. Slide the seat assembly (assembled in step 4) onto the seat base (Item 17). Check the fit on the plastic seat base
(Item 17) and adjust the metal brackets as necessary to achieve the desired fit. Ref. Diagram 4 and 6.
Diagram 6
17
Seat assembly
5. Position seat base (Item 17) as shown and lock onto the seat rail (Item 18). Lower the seat base onto the sled.
Ref. Diagram 5.
Diagram 5
18
17
Note: If necessary, lubricate opening
with WD-40 to make installation easier.
Seat rail may be held in place with a
crescent wrench to prevent twisting.
Seat Rail