Apple Color StyleWriter 2500 - Manual (Page 11)

m Don’t use devices that produce open flames, such as Bunsen burners, near
the printer.
m Don’t use alcohol-based or ammonia-based cleaners on or around the
printer.
m Always unplug the printer before cleaning it. (Use only the cleaning
procedure recommended in Chapter 4.)
m Clean the outside of the printer with only a damp cloth and, if necessary, a
mild soap or detergent. Be careful not to get liquid into the printer or the
power cord receptacle.
IMPORTANT The only way to disconnect power completely is to unplug the
power cord. Make sure at least one end of the power cord is within easy reach
so that you can unplug the Color StyleWriter 2500 when you need to.
Watch for these situations, and if one occurs pull the plug!
m the power cord or plug becomes frayed or otherwise damaged
m you spill something into the printer
m the printer is exposed to rain or any other excess moisture
m the printer has been dropped or otherwise damaged
m you suspect that your printer needs service or repair
WARNING Electrical equipment may be hazardous if misused. Operation
of this product, or similar products, must always be supervised by an
adult. Do not allow children access to the interior of any electrical
product and do not permit them to handle any cables.
2 Chapter 1