IEI Integration AFL2-12A-HM65 v1.12 - Manual (Page 62)

AFL2-12A-HM65 Series Panel PC
Page 48
There are two USB 2.0 connectors and two USB 3.0 connectors. All connectors are
located on the bottom panel of the AFL2-12A-HM65. To connect a USB device, please
follow the instructions below.
Step 5: Locate the USB connectors. The locations of the USB connectors are shown
in Chapter 1.
Step 6: Align the connectors. Align the USB device connector with one of the
connectors on the bottom panel. See
6
Figure 4-26.
Figure 4-26: USB Device Connection
Step 7: Insert the device connector. Once aligned, gently insert the USB device
connector into the onboard connector. Step 0:
4.9.5 HDMI Device Connection
The HDMI connector transmits a digital signal to compatible HDMI display devices such
as a TV or computer screen. To connect the HDMI cable to the AFL2-12A-HM65, follow
the steps below.
Step 1: Locate the HDMI connector. The location is shown in Chapter 1.