2 panel mounting – IEI Integration AFL2-12A-HM65 v1.12 User Manual

Page 47

AFL2-12A-HM65 Series Panel PC

Page 33

Step 4:

Secure the flat bezel panel PC to the interface pad by inserting four retention

screws through the bottom of the mounting arm interface pad and into the flat

bezel panel PC.

Step 0:

Figure 4-8: Arm Mounting (ARM-11-RS)

4.8.2 Panel Mounting

To mount the AFL2-12A-HM65 into a panel, please follow the steps below.

Step 1:

Select the position on the panel to mount the flat panel PC.

Step 2:

Cut out a section corresponding to the size shown below. The size must be

smaller then the outer edge.