IEI Integration AFL-08B-N270 v1.00 - Manual (Page 95)

AFL-08B-N270 User Manual
Page 95
WARNING:
The precautions outlined in this chapter should be strictly followed.
Failure to follow these precautions may result in permanent damage to
the AFL-08B-N270.
A.1 Safety Precautions
Please follow the safety precautions outlined in the sections that follow:
A.1.1 General Safety Precautions
Please ensure the following safety precautions are adhered to at all times.
Follow the electrostatic precautions outlined below whenever the
AFL-08B-N270 is opened.
Make sure the power is turned off and the power cord is disconnected
whenever the AFL-08B-N270 is being installed, moved or modified.
Do not apply voltage levels that exceed the specified voltage range.
Doing so may cause fire and/or an electrical shock.
Electric shocks can occur if the AFL-08B-N270 chassis is opened when the
AFL-08B-N270 is running.
Do not drop or insert any objects into the ventilation openings of the
AFL-08B-N270.
If considerable amounts of dust, water, or fluids enter the AFL-08B-N270,
turn off the power supply immediately, unplug the power cord, and contact the
AFL-08B-N270 vendor.
DO NOT do the following:
o DO NOT drop the AFL-08B-N270 against a hard surface.
o DO NOT strike or exert excessive force onto the LCD panel.
o DO NOT touch any of the LCD panels with a sharp object
o DO NOT use the AFL-08B-N270 in a site where the ambient temperature
exceeds the rated temperature