IEI Integration AFL-xxA-N270-Series v2.30 - Manual (Page 72)

AFL-xxA-N270 Series Panel PC
Page 56
5.1 System Maintenance Introduction
If the components of the AFOLUX AFL-xxA-N270 series fail they must be replaced.
Components that can be replaced include:
ƒ CF Module
ƒ Wireless LAN module
ƒ SO-DIMM module
Please contact the system reseller or vendor to purchase the replacement parts. Back
cover removal instructions for the AFOLUX AFL-xxA-N270 series are described below.
5.2 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the maintenance of the
AFL-xxA-N270 may result in permanent damage to the AFL-xxA-N270
and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the AFL-xxA-N270. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the AFL-xxA-N270 is accessed internally, or any other
electrical component is handled, the following anti-static precautions are strictly adhered
to.
ƒ Wear an anti-static wristband: - Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
ƒ Self-grounding: - Before handling the board touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
ƒ Use an anti-static pad: - When configuring the AFL-xxA-N270, place it on an
antic-static pad. This reduces the possibility of ESD damaging the
AFL-xxA-N270.