2 serial device connection, Figure 2-19: lan connection – IEI Integration AFL-W10A-N270 v1.00 User Manual

Page 46

AFL-W10A-N270 User Manual

Page 46

Step 2:

Align the connector.

Align the RJ-45 connector on the LAN cable with one of

the RJ-45 connectors on the bottom panel of the AFL-W10A-N270. See Figure

Figure 2-19: LAN Connection

Step 3:

Insert the LAN cable RJ-45 connector.

Once aligned, gently insert the LAN

cable RJ-45 connector into the onboard RJ-45 connector.

Step 0:

2.7.2 Serial Device Connection

The AFL-W10A-N270 has two DB-9 connectors for connecting to RS-232 and

RS-232/422/485 serial devices on the bottom panel. Follow the steps below to connect a

serial device to the AFL-W10A-N270 panel PC.

Step 1:

Locate the DB-9 connector

. The location of the DB-9 connector is shown in

Chapter 3

Step 2:

Insert the serial connector

Insert the DB-9 connector of a serial device into

the DB-9 connector on the external peripheral interface. See Figure 2-20.