IEI Integration TANK-820-H61 v2.00 - Manual (Page 97)

TANK-820 Em b e d d e d S ys te m
P a g e 84

9600 The transmission speed is 9600

19200 The transmission speed is 19200

38400 The transmission speed is 38400

57600 The transmission speed is 57600

115200 D EFAULT The transmission speed is 115200
 Data Bits [8]
Use the Data Bits option to specify the number of data bits.

7 Sets the data bits at 7.

8 D EFAULT Sets the data bits at 8.
 Parity [No n e]
Use the Parity option to specify the parity bit that can be sent with the data bits for
detecting the transmission errors.

None D EFAULT No parity bit is sent with the data bits.

Even The parity bit is 0 if the number of ones in the data
bits is even.

Odd The parity bit is 0 if the number of ones in the data
bits is odd.

Mark The parity bit is always 1. This option does not
provide error detection.

Space The parity bit is always 0. This option does not
provide error detection.
 Sto p Bits [1]
Use the Stop Bits option to specify the number of stop bits used to indicate the end of a
serial data packet. Communication with slow devices may require more than 1 stop bit.