5 mounting the system with mounting brackets, Ounting the, Ystem with – IEI Integration TANK-820-H61 v2.00 User Manual

Page 36: Ounting, Rackets, Figure 3-8: system fan installation, Figure 3-8 )

TANK-820 Em b e d d e d S ys te m

P a g e 23

Figure 3-8: System Fan Installation

S te p 4:

Connect the system fan cable to the CPU_FAN1 connector on the motherboard

of TANK-820.

S te p 5:

Reconnect the SATA signal and power cables to the TANK-820.

S te p 6:

Reinstall the cover.

3.5 Mo u n tin g th e S ys te m with Mo u n tin g Bra c ke ts

To mount the embedded system onto a wall or some other surface using the two mounting

brackets, please follow the steps below.

S te p 1:

Turn the embedded system to the left side panel.

S te p 2:

Align the two retention screw holes in each bracket with the corresponding

retention screw holes on the bottom surface or the left side panel (Figure 3-9).