AIPTEK Pocket DV 4100 - Manual (Page 12)

11
Setting the language
When you power on the camera for the fi rst time, the LCD
display may not be shown in your local language. You can
set the LCD display language using the method below:
Set the Mode Dial to the Settings
( ) mode, and the Settings menu will
display on the screen.
!
Use the Up or Down ( ) button to
highlight the LANGUAGE item.
When the LANGUAGE item is
highlighted, press the Enter ( )
button to enter the sub-menu. In the
sub-menu, use the Up or Down ( )
button to select a suitable language,
and then press the Enter ( )
button to adopt.
"
After all settings are done, you are
ready to use the camera. Set the
Mode Dial to other modes according
to your purpose.
AUTO OFF
A/V OUT
LANGUAGE
TIMESTAMP
DATE
10 MIN
NTSC
ENGLISH
OFF
01/01/2004
LANGUAGE
ENGLISH
DEUTSCH