IEI Integration IMBA-9454 v1.00 - Manual (Page 146)

IMBA-9454 Motherboard
Page 128
FAN 2 Mode Setting [Full On Mode]
Use the FAN 2 Mode Setting option to configure the second fan.
Full On Mode D EFAULT Fan is on all the time
Automatic mode Fan is off when the temperature is low enough.
Parameters must be set by the user.
PWM Manual mode Pulse width modulation set manually
FAN 3 Mode Setting [Full On Mode]
Use the FAN 3 Mode Setting option to configure the second fan.
Full On Mode D EFAULT Fan is on all the time
Automatic mode Fan is off when the temperature is low enough.
Parameters must be set by the user.
PWM Manual mode Pulse width modulation set manually
The following system parameters and values are shown. The system parameters that are
monitored are:
System Temperatures: The following system temperatures are monitored
o CPU Temperature
o System Temperature #1
o System Temperature #2
Fan Speeds: The following cooling fan speeds are monitored
o CPU Fan
o System Fan
o Fan3 Speed
Voltages: The following system voltages are monitored
o CPU Core
o +3.3V
o +5V