IEI Integration IMB-Q670 v2.00 - Manual (Page 114)

IMB-Q670 Micro-ATX Motherboard
Page 100

Disabled Disabled the console redirection function

Enabled D EFAULT Enabled the console redirection function
 Terminal Type [VT-100+]
Use the Terminal Type option to specify the remote terminal type.

VT100 The target terminal type is VT100

VT100+ D EFAULT The target terminal type is VT100+

VT-UTF8 The target terminal type is VT-UTF8

ANSI The target terminal type is ANSI
 Bits per second [115200]
Use the Bits per second option to specify the serial port transmission speed. The speed
must match the other side. Long or noisy lines may require lower speeds.

9600 Sets the serial port transmission speed at 9600.

19200 Sets the serial port transmission speed at 19200.

38400 Sets the serial port transmission speed at 38400.

57600 Sets the serial port transmission speed at 57600.

115200 D EFAULT Sets the serial port transmission speed at 115200.
5.3.11 IEI Feature
Use the IEI Feature menu (BIOS Menu 17) to configure One Key Recovery function.