IEI Integration IOWA-LX-600 - Manual (Page 88)

IOWA-LX-600 Half-size CPU Card
Page 74
Boot Other Device [Enabled]
Use the Boot Other Device option to determine whether the system uses a second or
third boot device if the first boot device is not found.
Disabled The system does not look for second and third boot
devices if the first one is not found.
Enabled (Default) The system looks for second and third boot devices if the
first one is not found.
Boot Up Floppy Seek [Enabled]
Use the Boot Up Floppy Seek option to enable the BIOS to determine if the floppy disk
drive installed has 40 or 80 tracks during the POST. 360K FDDs have 40 tracks while
760K, 1.2M and 1.44M FDDs all have 80 tracks.
Disabled BIOS does not search for the type of FDD drive by track
number. Note that there is no warning message if the
drive installed is 360K.
Enabled (Default) BIOS searches for a FDD to determine if it has 40 or 80
tracks. Note that BIOS cannot tell the difference between
720K, 1.2M or 1.44M drives as they all have 80 tracks.
Boot Up Numlock Status [On]
Use the Boot Up Numlock Status option to specify the default state of the numeric
keypad.
Off The keys on the keypad are not activated.
On (Default) Activates the keys on the keypad.
Gate A20 Option [Fast]
Use the Gate A20 Option option to set if the keyboard controller or the chipset controls
the Gate A20 switching.