IEI Integration IOWA-LX-600 - Manual (Page 77)

IOWA-LX-600 Half-size CPU Card
Page 63
5.1 Introduction
The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to
certain system settings. This chapter outlines the options that can be changed.
5.1.1 Starting Setup
The UEFI BIOS is activated when the computer is turned on. The setup program can be
activated in one of two ways.
1. Press the D ELETE key as soon as the system is turned on or
2. Press the D ELETE key when the “Press Del to enter SETUP” message
appears on the screen.
If the message disappears, restart the computer and try again.
5.1.2 Using Setup
Use the arrow keys to highlight items, press E NTER to select, press F1 for help and press
E SC to quit. Navigation keys are shown below.
Key Function
Up arrow Move to the item above
Down arrow Move to the item below
Left arrow Move to the item on the left hand side
Right arrow Move to the item on the right hand side
Page up / + Increase the numeric value or make changes
Page down / - Decrease the numeric value or make changes
Esc Main Menu – Quit and do not save changes into CMOS
Status Page Setup Menu and Option Page Setup Menu --
Exit current page and return to Main Menu
F1 General help, only for Status Page Setup Menu and Option
Page Setup Menu
F7 Load optimized defaults