2 ps/2 y-cable connection, Figure 4-13: ps/2 keyboard/mouse connector – IEI Integration IOWA-LX-600 User Manual

Page 71

IOWA-LX-600 Half-size CPU Card

Page 57

Step 3:

Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN

cable RJ-45 connector into the on-board RJ-45 connector.

Step 0:

4.9.2 PS/2 Y-Cable Connection

The IOWA-LX-600 has a PS/2 connector on the external peripheral interface panel. The

dual PS/2 connector is connected to the PS/2 Y-cable that came with the IOWA-LX-600.

One of the PS/2 cables is connected to a keyboard and the other to a mouse to the

system. Follow the steps below to connect a keyboard and mouse to the IOWA-LX-600.

Step 1:

Locate the dual PS/2 connector. The location of the PS/2 connector is shown

in Chapter 3.

Step 2:

Insert the keyboard/mouse connector.

Insert the PS/2 connector on the end

of the PS/2 y-cable into the external PS/2 connector. See

Figure 4-13.

Figure 4-13: PS/2 Keyboard/Mouse Connector

Step 3:

Connect the keyboard and mouse. Connect the keyboard and mouse to the

appropriate connector. The keyboard and mouse connectors can be