IEI Integration IOWA-LX-600 - Manual (Page 103)

IOWA-LX-600 Half-size CPU Card
Page 89
RxD2,TxD2
IR-Rx2Tx2 (Default)
Onboard Serial Port3 [Disabled]
Use the Onboard Serial Port 3 option to select the I/O address and IRQ for the onboard
serial port 3. The serial port can be disabled or the I/O address and the IRQ can be
automatically selected by the BIOS. The Onboard Serial Port 3 options are:
Disabled (Default)
3F8/IRQ7
2F8/IRQ5
3E8/IRQ7
2E8/IRQ5
Onboard Parallel Port [378/IRQ7]
The Onboard Parallel Port BIOS option assigns the I/O port address of the parallel port.
The following address options are available:
Disabled
378/IRQ7 (Default)
3BC/IRQ7
Parallel Port Mode [SPP]
The Parallel Port Mode selection selects the mode the parallel port operates in.
SPP (Default) The parallel port operates in the standard parallel
port (SPP) mode. This parallel port mode works with
most parallel port devices but is slow.
EPP The parallel port operates in the enhanced parallel
port mode (EPP). The EPP mode supports
bi-directional communication between the system
and the parallel port device and the transmission
rates between the two are much faster than the
SPP mode.