beautypg.com

3 usb cable, Figure 4-11: dual usb cable connection – IEI Integration IOWA-LX-600 User Manual

Page 69

background image

IOWA-LX-600 Half-size CPU Card

Page 55

4.8.3 USB Cable

The IOWA-LX-600 is shipped with a dual port USB 2.0 cable. To connect the USB cable

connector, please follow the steps below.

Step 1:

Locate the connectors. The locations of the USB connectors are shown in

Chapter 3.

WARNING:

If the USB pins are not properly aligned, the USB device can burn out.

Step 2:

Align the connectors. The cable has two connectors. Correctly align pin 1on

each cable connector with pin 1 on the IOWA-LX-600 USB connector.

Step 3:

Insert the cable connectors

.

Once the cable connectors are properly aligned

with the USB connectors on the IOWA-LX-600, connect the cable connectors to

the on-board connectors. See

6

Figure 4-11.

Figure 4-11: Dual USB Cable Connection

See also other documents in the category IEI Integration Hardware: