beautypg.com

3 serial device connection, Figure 4-14: serial device connector – IEI Integration IOWA-LX-600 User Manual

Page 72

background image

IOWA-LX-600 Half-size CPU Card

Page 58

distinguished from each other by looking at the small graphic at the top of the

connector.

Step 0:

4.9.3 Serial Device Connection

The IOWA-LX-600 has a single female DB-9 connector on the external peripheral

interface panel for a serial device. Follow the steps below to connect a serial device to the

IOWA-LX-600.

Step 1:

Locate the DB-9 connector. The location of the DB-9 connector is shown in

Chapter 3.

Step 2:

Insert the serial connector.

Insert the DB-9 connector of a serial device into

the DB-9 connector on the external peripheral interface. See

6

Figure 4-14.

Figure 4-14: Serial Device Connector