3 floppy configuration – IEI Integration PCIE-Q57A User Manual
Page 77
PCIE-Q57A PICMG 1.3 CPU Card
Page 65
Auto D
EFAULT
BIOS auto detects the DMA mode. Use this value if the IDE
disk drive support cannot be determined.
S.M.A.R.T [Auto]
Use the S.M.A.R.T option to auto-detect, disable or enable Self-Monitoring Analysis and
Reporting Technology (SMART) on the drive on the specified channel. S.M.A.R.T predicts
impending drive failures. The S.M.A.R.T BIOS option enables or disables this function.
Auto D
EFAULT
BIOS auto detects HDD SMART support.
Disabled
Prevents BIOS from using the HDD SMART feature.
Enabled
Allows BIOS to use the HDD SMART feature
32Bit Data Transfer [Enabled]
Use the 32Bit Data Transfer BIOS option to enables or disable 32-bit data transfers.
Disabled
Prevents the BIOS from using 32-bit data transfers.
Enabled D
EFAULT
Allows BIOS to use 32-bit data transfers on supported
hard disk drives.
5.3.3 Floppy Configuration
Use the Floppy Configuration menu to configure the floppy disk drive connected to the
system.