3 vga monitor connection, Figure 4-15: vga connector – IEI Integration PCIE-Q57A User Manual

Page 63

PCIE-Q57A PICMG 1.3 CPU Card

Page 51

4.8.3 VGA Monitor Connection

The PCIE-Q57A has a single female DB-15 connector on the external peripheral interface

panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect a monitor

to the PCIE-Q57A, please follow the instructions below.

Step 1:

Locate the female DB-15 connector. The location of the female DB-15

connector is shown in Chapter 3.

Step 2:

Align the VGA connector. Align the male DB-15 connector on the VGA screen

cable with the female DB-15 connector on the external peripheral interface.

Step 3:

Insert the VGA connector. Once the connectors are properly aligned with the

insert the male connector from the VGA screen into the female connector on the

PCIE-Q57A. See

Figure 4-15.

Figure 4-15: VGA Connector

Step 4:

Secure the connector. Secure the DB-15 VGA connector from the VGA

monitor to the external interface by tightening the two retention screws on either

side of the connector.

Step 0: