A.1 intel® amt setup procedure, A.2 intel® management engine bios extension, Ntel – IEI Integration PCIE-Q57A User Manual

Page 112: Etup, Rocedure, Anagement, Ngine, Bios, Xtension, A.1 intel

PCIE-Q57A PICMG 1.3 CPU Card

Page 100

A.1 Intel

AMT Setup Procedure

The PCIE-Q57A is featured with the Intel® Active Management Technology (AMT) 6.0. To

enable the Intel® AMT function, follow the steps below.

Step 1:

Make sure the DIMM1 socket is installed with one DDR3 DIMM.

Step 2:

Connect an Ethernet cable to the RJ-45 connector labeled LAN2.

Step 3:

The AMI BIOS options regarding the Intel® ME or Intel® AMT must be enabled,

including:

Intel AMT Configuration [Advanced]

ME Subsystem Configuration [Chipset]

Step 4:

Configure the Intel® Management Engine BIOS extension (MEBx) (see

Section A.2 below)

Step 5:

The following dialog window is displayed after the OS is loaded to show the

Intel® AMT status on the PCIE-Q57A is enabled.

Figure A-1: Intel® Active Management Technology Status Dialog

A.2 Intel

Management Engine BIOS Extension

This section describes the essential steps for using the Intel® Management Engine BIOS

extension (MEBx).

Step 1:

A screen prompts the user to press after a single beep during boot-up

process. To get into the Intel® MEBx settings, press .