beautypg.com

8 external peripheral interface connection, Xternal, Eripheral – IEI Integration PCIE-Q57A User Manual

Page 60: Nterface, Onnection, Figure 4-12: dual usb cable connection

background image

PCIE-Q57A PICMG 1.3 CPU Card

Page 48

Step 3:

Insert the cable connectors

.

Once the cable connectors are properly aligned

with the USB connectors on the PCIE-Q57A, connect the cable connectors to

the on-board connectors. See Figure 4-12.

Figure 4-12: Dual USB Cable Connection

Step 4:

Attach the bracket to the chassis. The USB 2.0 connectors are attached to a

bracket. To secure the bracket to the chassis please refer to the installation

instructions that came with the chassis.

Step 0:

4.8 External Peripheral Interface Connection

The following external peripheral devices can be connected to the external peripheral

interface connectors.

See also other documents in the category IEI Integration Hardware: