Extron Electronics XTRA Full Rack Series User Guide - Manual (Page 31)

100-240V 50/60 Hz 1.3A MAX
1
1 2 3 4
2
3
(BRIDGE A)
(BRIDGE B)
BRIDGE
8 ONLY
4 ON
OFF
( ) A B
1 2 BRIDGE A
3 4 BRIDGE B
List ed
17T T AUD IO/V IDE O
APP ARA TUS
LEVEL
REMOTE LIMITER/
PROTEC T
SIGNAL
INPUTS
OUTPUTS CLASS 2 WIRING
XP A 2004
BRIDGE MODE
1
0
2
0
3
0
4
0
4 / 8
4 / 8 BRIDGE
8 ONLY ( )
ST ANDB
Y
Mounting Ear
uses 5 screws
(ea side).
Mounting Screws
Figure 5. Rack Mounting the Amplifier
Rack Mounting Ventilation
Excessive heat can decrease the optimal lifetime of the power amplifier. An over temp
indicator LED on the front panel of the amplifier lights red whenever the recommended
operating temperature has been exceeded (see “
Front Panel Features and Operation ”).
To reduce the chances for an over temp condition, the XPA should be arranged in a rack
environment with up to a maximum of four XPAs stacked together with a minimum of
one vent space provided both above and below a stack, as shown below.
XTRA Full Rack Power Amplifier Series • Reference Information 26