Default settings, Etco, Accessories – ZOLL E Series Monitor Defibrillator Rev E ETCO2 User Manual
Page 16
E Series - End Tidal Carbon Dioxide (EtCO
2
) Option Insert
14
9650-1212-01
Rev.
E
Default Settings
When the unit is turned on, the following default EtCO
2
settings are automatically selected and remain in operation
until changed.
Note The power-on default settings for the capnogram waveform scale and CO
2
compensation are set in System
Configuration, as are the power-on default settings for alarm limits. See the E Series Configuration Guide for
more information.
EtCO
2
Accessories
The following table lists the accessories available for the E Series mainstream EtCO
2
monitoring option.
Table 1: CAPNOSTAT 5 Mainstream CO
2
Accessories
*
SPU = Single Patient Use
Parameter
Default Setting
Range
Averaging Mode
10 seconds
1 breath
10 seconds
20 seconds
High EtCO
2
Alarm Limit
55 mmHg
7.2%
7.3 kPa
5 - 100 mmHg, OFF
0.6 - 13.1%, OFF
0.6 -13.3 kPa, OFF
Low EtCO
2
Alarm Limit
25 mmHg
3.2%
3.3 kPa
0 - 95 mmHg, OFF
0 - 12.5%, OFF
0 -12.6 kPa, OFF
High Respiration Rate Alarm Limit
120 respirations per minute
5 - 150 respirations per minute, OFF
Low Respiration Rate Alarm Limit
5 respirations per minute
0 - 100 respirations per minute, OFF
Accessory REF
Application
CAPNOSTAT 5 CO
2
Sensor and Cable
8000-0312-01
SPU
*
Pediatric/Adult Airway Adapter
8000-0260-01
Single patient use, for ET tube sizes > 4.0 mm
SPU
*
Neonatal/Pediatric Airway Adapter
8000-0261-01
Single patient use, for ET tube sizes < 4.0 mm
Reusable Adult Airway Adapter
8000-0262-01
Reusable, for ET tube sizes > 4.0 mm
Reusable Neonatal/Pediatric Airway Adapter
8000-0263-01
Reusable, for ET tube sizes < 4.0 mm
SPU
*
Pediatric/Adult Airway Adapter with
Mouthpiece
8000-0265-01
Single patient use, for non-intubated patients
CAPNO
2
mask, Large Adult
8000-0761
SPU, for non-intubated large adults
CAPNO
2
mask, Standard Adult
8000-0760
SPU, for non-intubated adults
CAPNO
2
mask, Pediatric
8000-0762
SPU, for non-intubated adults pediatric patients