WolfVision VZ-35 - Manual (Page 18)

18
List of menu items / Initial setting:
Menu items: Setting or setting range: Initial setting:
GAIN (video gain) STEP only. DO NOT SET TO AGC ! STEP
STEP 0 to 18 dB (Change of setting is enabled by selection
of STEP on GAIN) 0 dB
C.TEMP (color temperature) 3200 K or 5600 K 3200 K
WHT.BAL (white balance) AUTO or MANU AUTO
R.GAIN*
B.GAIN* -99 to +99
(Change of setting is enabled by selection of MANU
on WHT.BAL) +00
CCD IRIS ON or OFF OFF
SHUTTER (electronic shutter) OFF, STEP or MANU OFF
STEP FL or 1/125 to 1/10.000 sec. (Change of setting is
enabled by selection of STEP on SHUTTER) FL
MANU Functions only when CCD IRIS is set to OFF.
(Change of setting is enabled by selection of MANU
on SHUTTER) OFF
M.PED* (master pedestal) -99 to +99 +00
DTL (detail) -99 to +99 -17
H.PHASE*
(horizontal phase) -99 to + 99 (Change of setting is enabled if a sync
signal is input to the SYNC input) +00
SC* (subcarrier phase) -99 to +99 +00
0/180 0 or 180 (Change of setting is enabled if a sync signal
is input to the SYNC input) 0
GAMMA (gamma
compensation) ON or OFF ON
G.SYNC
(Green with sync) ON or OFF ON
FLD/FRM (field/frame) FLD or FRM FLD
D-SUB (internal connector) Y/C only. DO NOT CHANGE! Y/C
* To restore the initial, or central, setting (+00) for this item, press the Data up and Data down keys simultaneously