Alpine DVA-9965 - Manual (Page 72)

70
-EN
System Example
Connect the External Monitor
The following example shows a system connection using the S-Video output to a front monitor with S-Video input and a touch panel compatible
rear monitor.
Connect the Ai-NET compatible audio processor (Fiber digital compatible) and changer
M.CONT (Rear)
REMOTE IN (Rear)
(White/Pink)
(White/Brown)
M.CONT
REMOTE OUT
(White/Pink)
(White/Brown)
1
4
5
2
3
6
7
To Video Input
terminal
To Audio Input
terminal
Touch panel
compatible monitor
(sold separately)
Monitor with S
terminal
(sold separately)
1 Monitor Control Lead (Rear) (White/Pink)
Connect this to the Monitor Control Lead of the touch panel
compatible rear monitor.
2 Remote Control Input Lead (Rear) (White/Brown)
Connect this to the remote control output lead for the rear
monitor (Alpine’s).
3 S video cable (Included)
4 Video Output connectors (Yellow)
5 Audio Output connectors
6 RCA Extension Cable (Included)
7 RCA Extension Cable (Sold separately)
1
Fiber optic cable
Ai-NET cable
4
1
2
3 3
Ai-NET
cable
*
Fiber optic cable
Fiber digital Input terminal
(for head unit)
Fiber digital Input terminal
(for changer)
Audio processor (Ai-NET)
(Fiber digital compatible)
(sold separately)
CD changer (Ai-NET)
(sold separately)
1 Fiber optic Cable (Sold Separately)
2 Ai-NET Cable (Included with CD Changer)
3 Ai-NET Connector
Connect this to the output or input connector of other
product equipped with Ai-NET.
4 Ai-NET Cable (Included with Audio Processor)
Please observe the following when using Fiber Optic Cable.
• Do not coil the Fiber Optic Cable smaller than a 30 mm radius.
• Do not place anything on top of the Fiber Optic Cable.
• Be careful not to bend the Fiber Optic Cable at a sharp angle.
* Only connect fiber digital
compatible CD changer