White’s Electronics Spectrum XLT - Manual (Page 46)

46
Chapter 5 XLT ® Pro Options
7
FADE RATE
MIN MAX
(Display section)
26. Fade
Clears or fades non-current SignaGraph™ informa-
tion (bars).
FADE allows past information to automatically
clear or fade from the SignaGraph™. Without Fade,
or with too slow of a FADE rate, the SignaGraph™
will fill with information that is no longer valid as
you sweep through a search area.
A minimum setting of 0 equals no fade at all. The
SignaGraph™ information will continue to appear
until the trigger is squeezed and released. A maxi-
mum setting of 14 selects a very quick fade rate.
The SignaGraph™ information will automatically
clear from the graph quickly. Ideally, a Fade Rate
should be selected that allows time to adequately
view the SignaGraph™ information yet still clear
the graph in a timely manner.
Tips - Recommended
for all but the SINGLE
SWEEP mode. Adjust
the rate of FADing so
that you have time to
view the SignGraph™
prior to it resetting.
However, do not set it
so slow as to show non-
current information.