Pro options, Overview) – White’s Electronics Spectrum XLT User Manual
Page 25
25
Chapter 5 XLT
®
Pro Options
Pro Options
AUDIO
AUDIO
AUDIO
AUDIO
AUDIO
1. RATCHET PINPOINTING - Pinpoint feature, automatically de-tunes for center location.
2. S.A.T. SPEED - Self Adjusting Threshold or Auto-tune, automatically maintains threshold.
3. TONE I.D. - Assigns each V.D.I. target number its own special tone or sound.
4. V.C.O. - Pinpoint or non-discriminate feature, increases pitch or tone with target strength.
5. ABSOLUTE VALUE - Bigfoot or Goldfoot loop accessories only.
6. MODULATION - Motion modes produce the same, or different volume, based on target depth.
G.E.B./TRAC
G.E.B./TRAC
G.E.B./TRAC
G.E.B./TRAC
G.E.B./TRAC
7. AUTOTRAC - Automatically updates Ground Balance during searching.
8. TRAC VIEW - TRACK appears on right side of display during AUTO TRAC adjustments.
9. AUTOTRAC SPEED - Dictates when AUTO TRAC adjusts Ground Balance.
10. AUTOTRAC OFFSET - Positive or negative AUTO TRAC (over, or under kill).
11. TRAC INHIBIT - Prevents tracking the ground during target detection.
12. COARSE G.E.B. - (Manual Ground Balance) Coarse viewing, or overriding automatic.
13. FINE G.E.B. - (Manual Ground Balance) Fine viewing, or overriding automatic.
DISCRIMINATION
DISCRIMINATION
DISCRIMINATION
DISCRIMINATION
DISCRIMINATION
14. DISC. EDIT - Change V.D.I. (target reference numbers) accepted (detected), or rejected status.
15. BLOCK EDIT - Speeds EDIT by dragging ACCEPT or REJECT with ARROW controls.
16. LEARN ACCEPT - Target samples can be used to show or teach ACCEPT discrimination.
17. LEARN REJECT - Target samples can be used to show or teach REJECT discrimination.
18. RECOVERY SPEED - Speeds target responses, so close together targets each respond.
19. BOTTLECAP REJECT - How strongly the instrument rejects or breaks up on iron.
DISPLAY
DISPLAY
DISPLAY
DISPLAY
DISPLAY
20. VISUAL DISC. - Rejected V.D.I. numbers and ICONS do not appear on display.
21. ICONS - Graphic display representation of metal targets, ON/OFF.
22. V.D.I. SENSITIVITY - Response intensity to produce a display indication & 3rd V.D.I. digit.
23. D.C. PHASE - Measurement of ground, or metal target, during pinpointing.
24. GRAPH AVERAGING - SignaGraph
®
information collects over multiples loop passes.
25. GRAPH ACCUMULATING - Emphasizes common or predominate SignaGraph
®
.
26. FADE RATE - Clears or fades non-current SignaGraph
®
information (bars).
SIGNAL (TRANSMIT, RECEIVE)
SIGNAL (TRANSMIT, RECEIVE)
SIGNAL (TRANSMIT, RECEIVE)
SIGNAL (TRANSMIT, RECEIVE)
SIGNAL (TRANSMIT, RECEIVE)
27. TRANSMIT BOOST - Selects the intensity of the signal transmitted from the loop.
28. TRANSMIT FREQUENCY - Alters operating frequency to avoid interference.
29. PREAMP GAIN - Selects the intensity of the signal received from the loop.
(Overview)