Asus Desktop Barebone Pundit P3-PH5 - Manual (Page 35)

2-1 ASUS Pundit P3-PH5
3. Connect one end of the supplied
7-pin SATA cable to the SATA
connector at the back of the
drive, then connect the other
end to a SATA connector on
the motherboard. See page
4-7 for the location of the SATA
connectors.
4. Connect the 15-pin SATA power
plug from the power supply unit to
the power connector at the back of
the drive.
5. Place the HDD on the tray. Make
sure that the HDD screws are
aligned with the screw holes and
rails.
6. When the HDD screws align with
the screw rails, push the drive
carefully until it is completely
flushed on the bay.
The HDD screw lock clicks to
indicate that the drive is properly
in place.
HDD screw lock