Vestil ZLTT series - Manual (Page 3)

08/04
V ESTIL M FG . C O ./T&S E QPT . C O . 3 of 16
W ARNINGS AND S AFETY I NSTRUCTIONS , MODEL ZLTT
Ensure that all employees understand and follow the following instructions.
o
Read and understand the owner’s manual before using or servicing the lift.
o
The unit must be lowered to the floor and the load removed from the platform before any
work is performed on the lift.
o
Ensure that all safety and warning labels stay in place and are legible. See the labels page
in this manual.
o
The lift’s frame must be securely anchored to the floor. See the installation instructions.
o
Do not use the lift if any damage or unusual noise is observed.
o
Always watch the lift and any load on it carefully when it is in operation.
o
The platform’s load must be centered and evenly distributed on the platform.
o
Do not perform any modifications to the lift without the manufacturer’s approval. Failure
to receive authorization for changes to the equipment could void the warranty.
o
Maintenance and repairs are to be done only by personnel qualified to perform the
required work.
o
Do not use brake fluid or jack oils in the hydraulic system. If oil is needed, use an anti-
wear hydraulic oil with a viscosity grade of 150 SUS at 100°F, (ISO 32 @ 40°C), or a
non-synthetic automatic transmission fluid.
o
Use only replacement parts either supplied or approved by the manufacturer.