Vestil PLID - Manual (Page 3)

3
D-Style hopper shown with lid
and lock bar installed.
Front lock bar brackets.
Install front lock bar bracket 6” from front of
chute and center on chute lip.
D-STYLE HOPPER LID BRACKET INSTALLATION
NOTE: Retrofit lid brackets can be welded or bolted on. If bolting on, holes will need to be drilled in the
hopper chute. The holes in the brackets can be used as a template.
Rear hinge brackets.
Line up bracket
with back of
chute lip.
Weld bracket into
place.
Rear hinge bracket.
(Bottom hole for hinge pin.)
Front lock bar bracket.
(Top hole for lock bar.)
NOTE: Front lock bar bracket
only needs to be installed if you
are going to be using the lock bar
and locking the lid to prevent
unauthorized use of the hopper.
6”
Optional bolt
holes.