Vestil Lifter-2 User Manual

Vestil Equipment

rev. 2/22/2013

Product manual, operation instructions.doc

IFTER

-2

ORTABLE

ORKSITE

IFT

NSTRUCTION

ANUAL

Receiving instructions:
After delivery, IMMEDIATELY remove the packaging from the product in a manner that preserves the
packaging and maintains the orientation of the product in the packaging; then inspect the product closely
to determine whether it sustained damage during transport. If damage is discovered during the
inspection, immediately record a complete description of the damage on the bill of lading. If the
product is undamaged, discard the packaging.

NOTES:
1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where
the product is used is exclusively the responsibility of the owner/end-user.

2) VESTIL is not liable for any injury or property damage that occurs as a consequence of failing to apply either: a)
the instructions in this manual; or b) information provided on labels affixed to the product.

Neither is Vestil

responsible for any consequential damages sustained as a result of failing to exercise sound judgment
while assembling, installing, using or maintaining this product.

ESTIL

ANUFACTURING

ORP

2999 North Wayne Street, P.O. Box 507, Angola, IN 46703

Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868

Fax: (260) 665-1339

www.vestilmfg.com e-mail:

[email protected]

Table of Contents

Hazard identification: explanation of signal words……………………………………………………………………. .. 2
Safety Guidelines…………………………………………………………………………..………………………….…... 2
Assembly and Use Instructions………………..………..……………………………………………………………...... 3
Loading the Lifter………………………………………………………………………………………………………...... 4
Inspections & Maintenance……………………………………………………………………………………………... .. 4
Exploded Parts Diagram and Bill of Materials………………………………………………………………………….. 5
Label placement diagram …………..

…………………………………………………………..................................... 6

Limited warranty………………………………………………………………………………………………………….. . 7