Vestil DLT series - Manual (Page 11)

The reader should understand the significant difference between “ Adjustments [and]
repairs,” and modifications. An adjustment or repair refers to a simple correction that restores the tongs
to normal operating condition, such as tightening loose fasteners, or removing debris. A modification is a
change that alters the tongs from normal operating condition, like bending the structural members.
NEVER modify the tongs without the express, written approval of Vestil. Modifications may
render the tongs unsafe to use.
DO NOT use the tongs if adjustments and/or repairs are incomplete! Return the tongs to service
ONLY after finishing all necessary repairs and/or adjustments.
Step 5: Install the replacement parts.
ASME B30.20 requires special markings for all repaired or modified lifters (die tongs).
Consult the standard and affix or attach the necessary marking(s).
Step 6: After the tongs have been repaired, conduct a periodic inspection. The tongs may be returned to
service ONLY IF they pass the inspection. Repeat steps 3-5 if the inspection reveals additional issues.
Step 7: Make a dated record of the repairs, adjustments and/or replacements made.
Markings:
Only use the tongs if ALL of the labels are readable and undamaged. Contact Vestil for replacement
labels.
FIG. 2: Product label placement
“Made in USA”
Manufacturer’s
Name Label
- 11 -