Vestil D-FORK - Manual

1
Vestil Manufacturing Corporation
2999 North Wayne St., Angola, IN 46703
Ph: 260-665-7586 • Fax: 260-665-1339
E-mail: [email protected]
www.vestil.com
SAFETY PRECAUTIONS
Read owner's manual completely before operating unit!
• Never exceed the maximum loading capacity of the
hoisting hook written on the warning label and capacity
label (p.2).
• Secure the hoisting hook using the screw clamp and
attach the safety chain to the mast of the fork truck
before use.
• Make sure the safety latch of the hook is secured
before lifting.
• Never load more than one load at a time.
• When elevation is not required, always transport the
load in the lower position.
• Consult factory if adding or performing any modifica-
tions to the original equipment.
• Use only replacement parts supplied or approved by
the manufacturer.
• Make sure all operator safety labels are in place (p.2).
Make sure the capacity label is clean and visible (p.2).
RECEIVING INSTRUCTIONS
Every unit is thoroughly tested and inspected prior
to shipment. However, it is possible that the unit may incur
damage during transit. If damage is noticed when unloading,
make a note of it on the BILL OF LADING. Remove all
packing and strapping material, then inspect the unit again
for damage. IF DAMAGE IS EVIDENT, FILE A CLAIM WITH
THE CARRIER IMMEDIATELY!
HOISTING HOOKS
MODEL D-FORK
OWNER'S
MANUAL
Revised 0107 08-126-101
A company dedicated to solving ergonomic and material
handling problems since 1955.
HOISTING HOOKS
D-FORK SERIES
Fork Truck Attachments
Contents
Safety Precautions ....................................... 1
Receiving Instructions .................................. 1
Warranty ....................................................... 1
Exploded Parts Drawing ............................... 2
Parts List ....................................................... 2
Warning Label Identification ......................... 2
WARRANTY
This product is warranted for 90 DAYS from date of
purchase to be free of manufacturing defects in material and
workmanship. The manufacturer's obligation hereunder is
limited to repairing such products during the warranty period,
provided the product is sent prepaid back to the factory.
This warranty does not cover normal wear of parts
or damage resulting from any of the following: negligent use
or misuse of the product, use or application contrary to
installation instructions, or disassembly, repair or alteration
by any person prior to authorization from a factory
representative.