Vestil CUP-3131 - Manual (Page 3)

07/12/2012 revised 9/11/2012 ??-126-12?.doc
U
SE
I
NSTRUCTIONS
Review this entire page before using the CUP-3131.
Contact the factory for answers to any questions that arise during assembly, or for information regarding optional features not
covered by this manual.
---------------------------------------------------------------------------------------
To properly use a standard CUP-3131:
1. Only use the CUP-3131 on flat, level, improved surfaces.
2. The maximum load rating of this product is 485 pounds. Do not exceed the maximum load rating.
3. This product is equipped with casters that retract as weight is applied to the steps. The platform / steps should be level and the
base of the stairs should firmly contact the floor whenever the platform is stood upon.
I NSPECTIONS & M AINTENANCE
Warning: Identify all potential hazards before beginning use and apply appropriate safety procedures during use.
(A) Daily inspections:
1.) Damage to or deformation of structural members, hand railing, casters and caster couplings, etc.
(B) Monthly inspections:
1.) Verify that all labels are in place and are readable (see diagram below).
L
ABEL
P
LACEMENT
D
IAGRAM
* Periodically examine and clean each label (if necessary) to maintain readability from a reasonable, safe viewing
distance. Contact the manufacturer for replacement labels.
Label 287
Label 847
C OPYRIGHT 2012 V ESTIL M FG . C O . 3