Vestil ALL-T-4-GPT User Manual
Page 2
5/23/2008 Vestil Manufacturing 2
WARNINGS & SAFETY INSTRUCTIONS
Warning: Failure to follow all instructions and warnings may result in
serious injury or death!
Be aware of and comply with all Federal, State, Local, ANSI, OSHA and all other codes
and regulations.
Read owner's manual completely before operating unit!
• Do not operate this truck unless you are trained and authorized.
• Do not overload the truck. Check capacity plate for loading
weight and lifting height. Do not handle unstable or loosely
stacked loads.
• Operate truck only from designated operating load position.
Never place any parts of your body under the truck or near
moving parts. Do not ride or carry passengers.
• The weight of goods should be distributed evenly on two forks.
Do not use only one fork or put the goods on the end of the
forks.
• Before leaving the truck, remember to fully lower and set the
parking brake by making sure the handle is in the vertical
position. Turn off the engine with the safety switch.
• Travel slowly and with caution on slopes.