Vanguard VBT-60_80 - Manual (Page 2)

VBT-60/80 Operating Procedures
2
SAFETY SUMMARY
NOTICE
This manual applies to Models VBT-60, and VBT-80. The operating procedures are virtually
the same for all models; any differences are clearly described in the step-by-step procedures.
Follow Exact Operating Procedures
Any deviation from the procedures described in this operator’s manual may create one or more
safety hazards, damage the VBT, or cause errors in the test results; Vanguard Instruments Co.,
Inc. assumes no liability for unsafe or improper use of the VBT.
The following safety precautions must be observed during all phases of test set up, test hookups,
testing, and test-lead disconnects.
SAFETY WARNINGS AND CAUTIONS
This device shall be used only by trained operators.
All circuit breakers under test shall be off line and fully isolated.
Do Not Modify Test Equipment
Because of the risk of introducing unknown hazards, do not install substitute parts or perform
any unauthorized modification to any Model VBT Test unit. To ensure that all designed safety
features are maintained, it is recommended that repairs be performed only by Vanguard
Instruments Co. factory personnel or by an authorized repair service. Unauthorized
modifications can cause serious safety hazards and will nullify the manufacturer's warranty.