Vanguard EZCT-2000 - Manual (Page 43)

REV 3 EZCT-2000 USER’S MANUAL
39
NOTES
• You can press the [STOP] key to cancel the process.
• If you do not know the test plan number, you can print a test
plan directory using the instructions in section 3.5.2.
The selected test plan will be erased and the following screen will be displayed:
Press any key to return to the “START-UP” menu.
2. ERASE ALL PLANS
Press the [2] key if you would like to erase all test plans. The following screen
will be displayed:
If you would like to cancel the erasure process, press the
[STOP]
key. No test
plans will be erased and you will be returned to the “START-UP” menu.
Press the
[ENTER]
key to continue with the erasure process. The following
screen will be displayed while the test plans are being erased:
The following screen will be displayed after all of the test plans have been
erased:
Press any key return to the “START-UP” menu.
PLANS ERASED!
ERASING ALL TEST PLANS
PLEASE WAIT...
ERASE ALL PLANS!
Are you sure?
“ENTER” TO CONTINUE
TEST PLAN NUMBER 1
ERASED!